FRENES

McLaren GT PCD

from 2019
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Fixing typeM14x1.50
Tightening torque130 Nm
Original tyres225/35R20
Hub centric rings 57.1 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a McLaren GT

A McLaren GT (from 2019) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Fixings: thread M14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a McLaren GT without rings. Offset, width, diameter and caliper clearance still need checking.

McLaren 750S from 2023 McLaren 765LT from 2020 McLaren 720S 2017–2023 McLaren 570GT 2016–2022 McLaren 570S 2015–2022 McLaren 675LT 2015–2017 McLaren 650S 2014–2017 McLaren MP4-12C from 2011 Cupra Terramar from 2024 Ford Capri from 2024 Ford Explorer EV from 2024 Skoda Elroq from 2024 Volkswagen Passat B9 from 2024 Volkswagen Tayron from 2024 Cupra Tavascan from 2023 Volkswagen ID.7 from 2023

Will wheels from another vehicle fit your GT?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a McLaren GT?

A McLaren GT (from 2019) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a McLaren GT need a hub centric ring?

The centre bore (hub diameter) of a McLaren GT is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What tightening torque for the wheels of a McLaren GT?

The specified tightening torque is 130 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a McLaren GT?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: McLaren 750S, McLaren 765LT, McLaren 720S, McLaren 570GT. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.