FRENES

Skoda Kodiaq II PCD

from 2024
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET40 to ET41
Fixing typeM14x1.5
Original tyres215/65R17, 235/55R18, 235/50R19, 235/45R20
Deuxième génération (NS8), aussi en iV hybride rechargeable et RS (20 pouces).
Wheel spacers for this vehicle, from €29.95(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Kodiaq II

A Skoda Kodiaq II (from 2024) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET40 to ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R17, 235/55R18, 235/50R19, 235/45R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Skoda Kodiaq

Previous generation: Skoda Kodiaq (from 2017) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Kodiaq from 2017 · 5x112 Kodiaq II from 2024

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57.1 mm 7Jx17 ET40 215/65R17
Version 2 5x112 57.1 mm 7.5Jx18 ET40 235/55R18
Version 3 5x112 57.1 mm 7.5Jx19 ET40 235/50R19
Version 4 5x112 57.1 mm 8Jx20 ET41 235/45R20

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Kodiaq II without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Elroq from 2024 Skoda Superb IV from 2024 Skoda Enyaq from 2020 Skoda Octavia IV from 2020 Skoda Kodiaq GT from 2019 Skoda Karoq from 2017 Skoda Kodiaq from 2017 Skoda Superb III 2015–2024 Skoda Octavia III 2013–2020 Skoda Yeti 2009–2014 Skoda Octavia Scout 2007–2009 Skoda Octavia II 2004–2013 Skoda Superb 2002–2008 Skoda Octavia I 1997–2005 Cupra Terramar from 2024 Ford Capri from 2024

Will wheels from another vehicle fit your Kodiaq II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Kodiaq II?

A Skoda Kodiaq II (from 2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Skoda Kodiaq II need a hub centric ring?

The centre bore (hub diameter) of a Skoda Kodiaq II is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Kodiaq II?

The recorded original offset is ET40 to ET41 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Skoda Kodiaq II?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Skoda Elroq, Skoda Superb IV, Skoda Enyaq, Skoda Octavia IV. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.