Nissan Stagea PCD

1996–2001

VERIFIED

Centre bore66 mm

Offset (ET)ET40 to ET45

Fixing typeEcrous - 12x1.25

Original tyres205/60R15, 215/55R17

Hub centric rings 66 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Stagea

A Nissan Stagea (1996–2001) uses a 5x114.3 PCD and a centre bore of 66 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 66 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66 mm.
Offset: the original is ET40 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R15, 215/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x114.3	66 mm	—	ET40	205/60R15
Version 2	5x114.3	66 mm	—	ET45	215/55R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Stagea without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Vanette Cargo 1995–2001

Will wheels from another vehicle fit your Stagea?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66 mm, and will not fit if it is smaller.

Nissan Qashqai J12 ⌀66.1 Nissan Townstar ⌀66.1 Nissan Ariya ⌀66.1 Nissan Juke II ⌀66.1 Nissan NV300 ⌀66.1 Nissan Murano ⌀66.1 Nissan e-NV200 ⌀66.1 Nissan Pulsar ⌀66.1

Frequently asked questions

What is the PCD of a Nissan Stagea?

A Nissan Stagea (1996–2001) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Nissan Stagea need a hub centric ring?

The centre bore (hub diameter) of a Nissan Stagea is 66 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Stagea?

The recorded original offset is ET40 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Nissan Stagea?

With the same PCD (5x114.3) and the same centre bore (66 mm), these include: Nissan Vanette Cargo. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.