Rolls-Royce Dawn PCD

2015–2022

VERIFIED

Centre bore72.6 mm

Offset (ET)ET25

Fixing typeM14x1.25

Original tyres255/45R20

Hub centric rings 72.6 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Rolls-Royce Dawn

A Rolls-Royce Dawn (2015–2022) uses a 5x120 PCD and a centre bore of 72.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 72.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 72.6 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 255/45R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 72.6 mm centre bore: wheels from these vehicles bolt on and centre on a Rolls-Royce Dawn without rings. Offset, width, diameter and caliper clearance still need checking.

Rolls-Royce Wraith from 2013 Rolls-Royce Ghost 2009–2014 Rolls-Royce Phantom VII 2003–2016 Land Rover Range Rover V from 2022 Land Rover Discovery V from 2017 BMW M2 from 2016 Alpina B4 axe arrière 2014–2019 Alpina B4 axe avant 2014–2019 Alpina B3 2013–2019 Alpina D3 2013–2019 Alpina D5 2011–2017 Lamborghini Aventador from 2011 BMW X6 M E71 axe arrière 2009–2014 BMW X6 E71 axe arrière 2008–2014 Fisker Latigo CS 2005–2007 Alpina B10 1988–1996

Will wheels from another vehicle fit your Dawn?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Rolls-Royce Dawn?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Land Rover Range Rover V from 2022 Wheels from Alpina D5 2011–2017 Wheels from Lamborghini Aventador from 2011 Wheels from BMW X6 M E71 axe arrière 2009–2014

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 72.6 mm, and will not fit if it is smaller.

Lexus TX ⌀60.1 Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1 VinFast VF9 ⌀74.1 BYD Han ⌀64.1 BYD Seal ⌀64.1 Lotus Eletre ⌀63.4

Frequently asked questions

What is the PCD of a Rolls-Royce Dawn?

A Rolls-Royce Dawn (2015–2022) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Rolls-Royce Dawn need a hub centric ring?

The centre bore (hub diameter) of a Rolls-Royce Dawn is 72.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Rolls-Royce Dawn?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Rolls-Royce Dawn?

With the same PCD (5x120) and the same centre bore (72.6 mm), these include: Rolls-Royce Wraith, Rolls-Royce Ghost, Rolls-Royce Phantom VII, Land Rover Range Rover V. Offset, width and rim diameter still need checking for each vehicle.

Other Rolls-Royce models

Cullinan 5x112 Wraith 5x120 Ghost 5x112 Phantom VII 5x120 All Rolls-Royce →

Does a value look wrong, or is a version missing? Let us know, we check every report.