Land Rover Discovery V PCD

from 2017

VERIFIED

Centre bore72.6 mm

Offset (ET)ET39

Fixing typeEcrous - 14x1.50

Tightening torque140 Nm

Hub centric rings 72.6 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Land Rover Discovery V

A Land Rover Discovery V (from 2017) uses a 5x120 PCD and a centre bore of 72.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 72.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 72.6 mm.
Offset: the original is ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 72.6 mm centre bore: wheels from these vehicles bolt on and centre on a Land Rover Discovery V without rings. Offset, width, diameter and caliper clearance still need checking.

Land Rover Range Rover V from 2022 Land Rover Defender 1983–1990 BMW M2 from 2016 Rolls-Royce Dawn 2015–2022 Alpina B4 axe arrière 2014–2019 Alpina B4 axe avant 2014–2019 Alpina B3 2013–2019 Alpina D3 2013–2019 Rolls-Royce Wraith from 2013 Alpina D5 2011–2017 Lamborghini Aventador from 2011 BMW X6 M E71 axe arrière 2009–2014 Rolls-Royce Ghost 2009–2014 BMW X6 E71 axe arrière 2008–2014 Fisker Latigo CS 2005–2007 Rolls-Royce Phantom VII 2003–2016

Will wheels from another vehicle fit your Discovery V?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 72.6 mm, and will not fit if it is smaller.

Land Rover Range Rover IV ⌀72.5 Land Rover Discovery IV ⌀72.5 Land Rover Discovery III ⌀72.5 Land Rover Range Rover III ⌀72.5 Land Rover Discovery II ⌀70.1 Land Rover Range Rover II ⌀70.1 Lexus TX ⌀60.1 Nio EL6 ⌀62.6

Frequently asked questions

What is the PCD of a Land Rover Discovery V?

A Land Rover Discovery V (from 2017) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Land Rover Discovery V need a hub centric ring?

The centre bore (hub diameter) of a Land Rover Discovery V is 72.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Land Rover Discovery V?

The recorded original offset is ET39. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Land Rover Discovery V?

The specified tightening torque is 140 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Land Rover Discovery V?

With the same PCD (5x120) and the same centre bore (72.6 mm), these include: Land Rover Range Rover V, Land Rover Defender, BMW M2, Rolls-Royce Dawn. Offset, width and rim diameter still need checking for each vehicle.

Other Land Rover models

Range Rover V 5x120 Range Rover Velar 5x108 Range Rover IV 5x120 Evoque 5x108 Discovery IV 5x120 Freelander II 5x108 Discovery III 5x120 Range Rover III 5x120 Discovery II 5x120 Freelander 5x114.3 Range Rover II 5x120 Discovery I 5x165.1 All Land Rover →

Does a value look wrong, or is a version missing? Let us know, we check every report.