FRENES

Smart Fortwo axe arrière PCD

1998–2007
VERIFIED
⌀57.1
PCD3x112 or 4x100
Centre bore57.1 or 60.1 mm
Offset (ET)ET-1 to ET32
Fixing typeM12x1.50
Tightening torque110 Nm
Original tyres155/60R15, 195/50R15, 165/65R15
⚠ This model comes with 3x112 or 4x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 57.1 mm → Wheel spacers 3x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Smart Fortwo axe arrière

A Smart Fortwo axe arrière (1998–2007) uses a 3x112 or 4x100 PCD and a centre bore of 57.1 or 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 3x112 or 4x100 required. See all vehicles with 3x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET-1 to ET32. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/60R15, 195/50R15, 165/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 3x112 57.1 mm — ET-1 155/60R15
Version 2 3x112 57.1 mm — ET-1 195/50R15
Version 3 4x100 60.1 mm — ET32 165/65R15

Vehicles with the same PCD and centre bore

Same 3x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Smart Fortwo axe arrière without rings. Offset, width, diameter and caliper clearance still need checking.

Smart Fortwo axe avant 1998–2007

Will wheels from another vehicle fit your Fortwo axe arrière?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Smart Fortwo axe arrière?

A Smart Fortwo axe arrière (1998–2007) can have a 3x112 or 4x100 PCD depending on the version: check on an original wheel.

Does a Smart Fortwo axe arrière need a hub centric ring?

The centre bore (hub diameter) of a Smart Fortwo axe arrière is 57.1 or 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Smart Fortwo axe arrière?

The recorded original offset is ET-1 to ET32 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Smart Fortwo axe arrière?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Smart Fortwo axe arrière?

With the same PCD (3x112) and the same centre bore (57.1 mm), these include: Smart Fortwo axe avant. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.