Acura Vigor PCD

1992–1994

VERIFIED

Centre bore64 mm

Offset (ET)ET41

Fixing typeEcrous - 12x1.50

Tightening torque130 Nm

Original tyres205/60R16

Hub centric rings 64 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Acura Vigor

A Acura Vigor (1992–1994) uses a 4x114.3 PCD and a centre bore of 64 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 64 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64 mm.
Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your Vigor?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64 mm, and will not fit if it is smaller.

Acura Legend ⌀64.1 Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1

Frequently asked questions

What is the PCD of a Acura Vigor?

A Acura Vigor (1992–1994) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Acura Vigor need a hub centric ring?

The centre bore (hub diameter) of a Acura Vigor is 64 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Acura Vigor?

The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Acura Vigor?

The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Acura models

ILX 5x114.3 TLX 5x114.3 RDX 5x114.3 RLX 5x120 MDX 5x120 NSX axe arrière 5x120 NSX axe avant 5x120 3.5 RL 5x114.3 NSX 5x114.3 Legend 4x114.3 All Acura →

Does a value look wrong, or is a version missing? Let us know, we check every report.