Acura Legend PCD

1985–1990

VERIFIED

Centre bore64.1 mm

Offset (ET)ET50

Fixing typeEcrous - 12x1.50

Hub centric rings 64.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Acura Legend

A Acura Legend (1985–1990) uses a 4x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Acura Legend without rings. Offset, width, diameter and caliper clearance still need checking.

Rover 600-Serie 1993–1999 Honda Prelude 4 trou 1992–2000 Rover 800-Serie 1986–1991 Honda Legend 1985–1990 Honda Accord 1982–1990

Will wheels from another vehicle fit your Legend?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Acura Vigor ⌀64 Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1

Frequently asked questions

What is the PCD of a Acura Legend?

A Acura Legend (1985–1990) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Acura Legend need a hub centric ring?

The centre bore (hub diameter) of a Acura Legend is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Acura Legend?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Acura Legend?

With the same PCD (4x114.3) and the same centre bore (64.1 mm), these include: Rover 600-Serie, Honda Prelude 4 trou, Rover 800-Serie, Honda Legend. Offset, width and rim diameter still need checking for each vehicle.

Other Acura models

ILX 5x114.3 TLX 5x114.3 RDX 5x114.3 RLX 5x120 MDX 5x120 NSX axe arrière 5x120 NSX axe avant 5x120 3.5 RL 5x114.3 Vigor 4x114.3 NSX 5x114.3 All Acura →

Does a value look wrong, or is a version missing? Let us know, we check every report.