FRENES

Alfa Romeo Giulietta 940 PCD

2010–2020
VERIFIED
⌀65.1
PCD5x110
Centre bore65.1 mm
Offset (ET)ET41
Fixing typeM12x1.25
Tightening torque120 Nm
Original tyres205/55R16, 225/45R17, 225/40R18
Wheel spacers 5x110(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Alfa Romeo Giulietta 940

A Alfa Romeo Giulietta 940 (2010–2020) uses a 5x110 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x110 required. See all vehicles with 5x110.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/55R16, 225/45R17, 225/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Alfa Romeo Giulietta

Previous generation: Alfa Romeo Giulietta (1954–1965) — the bolt pattern changes (5x110 instead of 4x98): the wheels are not interchangeable.

Giulietta 1954–1965 · 4x98 Giulietta 940 2010–2020

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x110 65.1 mm 7Jx16 ET41 205/55R16
Version 2 5x110 65.1 mm 7.5Jx17 ET41 225/45R17
Version 3 5x110 65.1 mm 7.5Jx18 ET41 225/40R18

Vehicles with the same PCD and centre bore

Same 5x110 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Alfa Romeo Giulietta 940 without rings. Offset, width, diameter and caliper clearance still need checking.

Alfa Romeo Tonale from 2022 Alfa Romeo Stelvio from 2017 Alfa Romeo Giulia 952 from 2016 Alfa Romeo 159 2005–2012 Alfa Romeo Brera 2005–2010 Alfa Romeo Spider 1970–1993 Alfa Romeo Giulia 1962–1980 Alfa Romeo Giulietta 1954–1965 Maserati Grecale from 2022 Opel Adam S from 2015 Fiat 500X from 2014 Jeep Cherokee 2014–2024 Jeep Renegade from 2014 Dodge Dart 2012–2018 Lotus Exige S3 front 2011–2021 Opel Meriva from 2010

Will wheels from another vehicle fit your Giulietta 940?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Dodge Stratus ⌀57.1

Frequently asked questions

What is the PCD of a Alfa Romeo Giulietta 940?

A Alfa Romeo Giulietta 940 (2010–2020) has a PCD of 5x110: 5 studs or bolts spaced around a circle 110 mm in diameter.

Does a Alfa Romeo Giulietta 940 need a hub centric ring?

The centre bore (hub diameter) of a Alfa Romeo Giulietta 940 is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Alfa Romeo Giulietta 940?

The recorded original offset is ET41 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Alfa Romeo Giulietta 940?

The specified tightening torque is 120 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Alfa Romeo Giulietta 940?

With the same PCD (5x110) and the same centre bore (65.1 mm), these include: Alfa Romeo Tonale, Alfa Romeo Stelvio, Alfa Romeo Giulia 952, Alfa Romeo 159. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.