FRENES

Alfa Romeo Stelvio PCD

from 2017
VERIFIED
⌀65.1
PCD5x110
Centre bore65.1 mm
Offset (ET)ET34
Fixing typeM14x1.50
Tightening torque130 Nm
Original tyres235/65R17
Hub centric rings 65.1 mm → Wheel spacers 5x110(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Alfa Romeo Stelvio

A Alfa Romeo Stelvio (from 2017) uses a 5x110 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x110 required. See all vehicles with 5x110.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET34. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x110 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Alfa Romeo Stelvio without rings. Offset, width, diameter and caliper clearance still need checking.

Alfa Romeo Tonale from 2022 Alfa Romeo 159 2005–2012 Alfa Romeo Brera 2005–2010 Alfa Romeo Spider 1970–1993 Alfa Romeo Giulia 1962–1980 Alfa Romeo Giulietta 1954–1965 Maserati Grecale from 2022 Opel Adam S from 2015 Fiat 500X from 2014 Jeep Cherokee 2014–2024 Jeep Renegade from 2014 Dodge Dart 2012–2018 Lotus Exige S3 front 2011–2021 Opel Meriva from 2010 Saab 9-3X 2009–2014 Opel Corsa D OPC 2007–2014

Will wheels from another vehicle fit your Stelvio?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Dodge Stratus ⌀57.1

Frequently asked questions

What is the PCD of a Alfa Romeo Stelvio?

A Alfa Romeo Stelvio (from 2017) has a PCD of 5x110: 5 studs or bolts spaced around a circle 110 mm in diameter.

Does a Alfa Romeo Stelvio need a hub centric ring?

The centre bore (hub diameter) of a Alfa Romeo Stelvio is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Alfa Romeo Stelvio?

The recorded original offset is ET34. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Alfa Romeo Stelvio?

The specified tightening torque is 130 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Alfa Romeo Stelvio?

With the same PCD (5x110) and the same centre bore (65.1 mm), these include: Alfa Romeo Tonale, Alfa Romeo 159, Alfa Romeo Brera, Alfa Romeo Spider. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.