Dodge Stratus PCD

1995–2000

VERIFIED

Centre bore57.1 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.50

Tightening torque135 Nm

Hub centric rings 57.1 mm → Wheel spacers 5x110(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Dodge Stratus

A Dodge Stratus (1995–2000) uses a 5x110 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x110 required. See all vehicles with 5x110.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Stratus?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Dodge Dart ⌀65.1 Alfa Romeo Tonale ⌀65.1 Maserati Grecale ⌀65.1 Alfa Romeo Stelvio ⌀65.1 Opel Adam S ⌀65.1 Fiat 500X ⌀65.1 Jeep Cherokee ⌀65.1 Jeep Renegade ⌀65.1

Frequently asked questions

What is the PCD of a Dodge Stratus?

A Dodge Stratus (1995–2000) has a PCD of 5x110: 5 studs or bolts spaced around a circle 110 mm in diameter.

Does a Dodge Stratus need a hub centric ring?

The centre bore (hub diameter) of a Dodge Stratus is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Dodge Stratus?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Dodge Stratus?

The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Dodge models

Dart 5x110 Challenger 5x115 Journey 5x127 Avenger 5x114.3 Nitro 5x114.3 Caliber 5x114.3 Charger 5x115 Magnum 5x115 Magnum 4x4 5x115 Neon SRT4 5x100 Caravan 5x114.3 Grand Caravan 5x114.3 All Dodge →

Does a value look wrong, or is a version missing? Let us know, we check every report.