Audi S2 PCD

1990–1995

VERIFIED

Centre bore57.1 mm

Offset (ET)ET37

Fixing typeM14x1.50

Hub centric rings 57.1 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi S2

A Audi S2 (1990–1995) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x112 required. See all vehicles with 5x112.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET37. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi S2 without rings. Offset, width, diameter and caliper clearance still need checking.

Audi Q4 E-TRON from 2021 Audi A3 8Y from 2020 Audi RS Q3 from 2019 Audi SQ2 from 2019 Audi Q2 2016–2021 Audi TTS 8S 2016–2023 Audi TT 2014–2023 Audi Q3 RS 2013–2018 Audi A3 8V 2012–2020 Audi Q3 2011–2018 Audi RS3 2011–2015 Audi TT RS 2009–2014 Audi RS6 C6 2008–2010 Audi TTS 8J 2008–2014 Audi R8 axe arrière 2007–2015 Audi R8 axe avant 2007–2015

Will wheels from another vehicle fit your S2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x112 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Audi A4 ⌀66.5 Audi RS Q8 ⌀66.5 Audi RS6 C8 ⌀66.5 Audi S6 C8 ⌀66.5 Audi SQ8 ⌀66.5 Audi A6 C8 ⌀66.5 Audi A7 ⌀66.5 Audi A8 D5 ⌀66.5

Frequently asked questions

What is the PCD of a Audi S2?

A Audi S2 (1990–1995) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi S2 need a hub centric ring?

The centre bore (hub diameter) of a Audi S2 is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi S2?

The recorded original offset is ET37. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Audi S2?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Audi Q4 E-TRON, Audi A3 8Y, Audi RS Q3, Audi SQ2. Offset, width and rim diameter still need checking for each vehicle.

Other Audi models

Q4 E-TRON 5x112 A3 8Y 5x112 RS6 C8 5x112 RS Q8 5x112 A1 Citycarver 5x100 SQ8 5x112 RS Q3 5x112 S6 C8 5x112 A4 5x112 SQ2 5x112 A7 5x112 E-Tron 5x112 All Audi →

Does a value look wrong, or is a version missing? Let us know, we check every report.