FRENES

BMW X5 M F95 PCD

from 2019
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET31 to ET43
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres295/35R21, 315/35R21, 315/30R22
Arrière 22 pouces avec avant 21 pouces (Competition)
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BMW X5 M F95

A BMW X5 M F95 (from 2019) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET31 to ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 295/35R21, 315/35R21, 315/30R22. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x112 66.6 mm 10.5Jx21 ET31 295/35R21
Arrière 5x112 66.6 mm 11.5Jx21 ET43 315/35R21
Arrière 5x112 66.6 mm 11.5Jx22 ET43 315/30R22

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a BMW X5 M F95 without rings. Offset, width, diameter and caliper clearance still need checking.

BMW 2 Serie Gran Coupe F74 from 2025 BMW 1 Serie F70 from 2024 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW X3 G45 from 2024 BMW I5 from 2023 BMW M2 G87 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023 BMW 7 Serie G70 from 2022 BMW i7 from 2022 BMW iX1 U11 from 2022 BMW X1 U11 from 2022 BMW 2 Serie Coupe G42 from 2021 BMW 2 Serie F44 from 2021 BMW i4 from 2021

Will wheels from another vehicle fit your X5 M F95?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a BMW X5 M F95?

A BMW X5 M F95 (from 2019) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a BMW X5 M F95 need a hub centric ring?

The centre bore (hub diameter) of a BMW X5 M F95 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BMW X5 M F95?

The recorded original offset is ET31 to ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BMW X5 M F95?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BMW X5 M F95?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: BMW 2 Serie Gran Coupe F74, BMW 1 Serie F70, BMW iX2 U10, BMW X2 U10. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.