FRENES

Chevrolet Lanos PCD

1997–2004
VERIFIED
⌀56.6
PCD4x100
Centre bore56.6 mm
Offset (ET)ET45
Fixing typeM12x1.50
Tightening torque90 Nm
Original tyres175/70R13
Hub centric rings 56.6 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Lanos

A Chevrolet Lanos (1997–2004) uses a 4x100 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 90 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Lanos without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Spark M400 2016–2023 Chevrolet Spark M300 2010–2023 Chevrolet Kalos 2002–2008 Chevrolet Nubira 1997–2003 Chevrolet Nexia 1995–2000 Opel Karl from 2015 Opel Adam Rocks from 2014 Opel Corsa E 2014–2019 Opel Adam from 2012 Holden Barina 4 trou from 2011 Holden Barina Spark from 2010 Fiat Punto Evo 2009–2012 Saturn Astra 4 trou 2007–2010 Opel Corsa D 4 trou 2006–2014 Fiat Grand Punto 2005–2009 Holden Barina 2005–2011

Will wheels from another vehicle fit your Lanos?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chevrolet Lanos?

A Chevrolet Lanos (1997–2004) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Chevrolet Lanos need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Lanos is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Lanos?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Lanos?

The specified tightening torque is 90 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Lanos?

With the same PCD (4x100) and the same centre bore (56.6 mm), these include: Chevrolet Spark M400, Chevrolet Spark M300, Chevrolet Kalos, Chevrolet Nubira. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.