Holden Barina PCD

2005–2011

VERIFIED

Centre bore56.6 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Original tyres185/60R14

Hub centric rings 56.6 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Holden Barina

A Holden Barina (2005–2011) uses a 4x100 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/60R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Holden Barina without rings. Offset, width, diameter and caliper clearance still need checking.

Holden Barina 4 trou from 2011 Holden Barina Spark from 2010 Chevrolet Spark M400 2016–2023 Opel Karl from 2015 Opel Adam Rocks from 2014 Opel Corsa E 2014–2019 Opel Adam from 2012 Chevrolet Spark M300 2010–2023 Fiat Punto Evo 2009–2012 Saturn Astra 4 trou 2007–2010 Opel Corsa D 4 trou 2006–2014 Fiat Grand Punto 2005–2009 Lotus Exige S2 2005–2011 Opel Astra H 4 trou 2004–2009 Opel Tigra Twin Top from 2004 Opel Meriva 4 trou 2003–2010

Will wheels from another vehicle fit your Barina?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Holden Barina?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Opel Karl from 2015 Wheels from Opel Corsa D 4 trou 2006–2014 Wheels from Opel Combo 4 trou 2001–2010 Wheels from Chevrolet Nubira 1997–2003

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.6 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Holden Barina?

A Holden Barina (2005–2011) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Holden Barina need a hub centric ring?

The centre bore (hub diameter) of a Holden Barina is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Holden Barina?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Holden Barina?

With the same PCD (4x100) and the same centre bore (56.6 mm), these include: Holden Barina 4 trou, Holden Barina Spark, Chevrolet Spark M400, Opel Karl. Offset, width and rim diameter still need checking for each vehicle.

Other Holden models

Commodore VF 5x120 Cruze Wagon Diesel 5x115 Cruze Wagon Essence 5x105 Volt 5x115 Barina 4 trou 4x100 Barina 5 trou 5x105 Combo 5x98 Barina Spark 4x100 Colorado 6x139.7 Cruze Diesel 5x115 Cruze Essence 5x105 Captiva 5x115 All Holden →

Does a value look wrong, or is a version missing? Let us know, we check every report.