FRENES

Chevrolet Matiz PCD

1998–2004
VERIFIED
⌀69.1
PCD4x114.3
Centre bore69.1 mm
Offset (ET)ET45
Fixing typeEcrous - 12x1.25
Tightening torque100 Nm
Original tyres155/65R13
Hub centric rings 69.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Matiz

A Chevrolet Matiz (1998–2004) uses a 4x114.3 PCD and a centre bore of 69.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 69.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 69.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/65R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 69.1 mm — ET45 155/65R13
Version 2 4x114.3 69.1 mm — ET45 —

Will wheels from another vehicle fit your Matiz?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chevrolet Matiz?

A Chevrolet Matiz (1998–2004) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Chevrolet Matiz need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Matiz is 69.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Matiz?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Matiz?

The specified tightening torque is 100 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Does a value look wrong, or is a version missing? Let us know, we check every report.