Chevrolet Evanda PCD

2003–2006

VERIFIED

Centre bore56.6 mm

Offset (ET)ET44

Fixing typeEcrous - 12x1.50

Tightening torque110 Nm

Hub centric rings 56.6 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Evanda

A Chevrolet Evanda (2003–2006) uses a 4x114.3 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
Offset: the original is ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Evanda without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Epica from 2006 Chevrolet Lacetti 2002–2011 Chevrolet Rezzo 2001–2008 Chevrolet Tacuma 2001–2008 Chevrolet Leganza 1998–2003 Chevrolet Nubira 1997–2003 Chery Fora from 2006

Will wheels from another vehicle fit your Evanda?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.6 mm, and will not fit if it is smaller.

Chevrolet Matiz ⌀69.1 Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Smart Forfour ⌀67.1 Kia Cerato ⌀67.1 Mitsubishi Lancer 1.3i, 1.6i ⌀67.1

Frequently asked questions

What is the PCD of a Chevrolet Evanda?

A Chevrolet Evanda (2003–2006) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Chevrolet Evanda need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Evanda is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Evanda?

The recorded original offset is ET44. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Evanda?

The specified tightening torque is 110 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Evanda?

With the same PCD (4x114.3) and the same centre bore (56.6 mm), these include: Chevrolet Epica, Chevrolet Lacetti, Chevrolet Rezzo, Chevrolet Tacuma. Offset, width and rim diameter still need checking for each vehicle.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Corvette C7 5x120.65 Trax 5x105 Volt 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Orlando 5x115 Silverado 2500 8x180 Spark M300 4x100 Cruze Essence 5x105 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.