Chevrolet Leganza PCD

1998–2003

VERIFIED

Centre bore56.6 mm

Offset (ET)ET49

Fixing typeEcrous - 12x1.50

Tightening torque100 Nm

Original tyres205/60R15

⚠ This model comes with 5x114.3 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 56.6 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Leganza

A Chevrolet Leganza (1998–2003) uses a 5x114.3 or 4x114.3 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 or 4x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x114.3	56.6 mm	—	ET49	205/60R15
Version 2	4x114.3	56.6 mm	—	ET49	—

Will wheels from another vehicle fit your Leganza?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.6 mm, and will not fit if it is smaller.

Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1 Renault 5 E-Tech ⌀66.1

Frequently asked questions

What is the PCD of a Chevrolet Leganza?

A Chevrolet Leganza (1998–2003) can have a 5x114.3 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Chevrolet Leganza need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Leganza is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Leganza?

The recorded original offset is ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Leganza?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Corvette C7 5x120.65 Trax 5x105 Volt 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Orlando 5x115 Silverado 2500 8x180 Spark M300 4x100 Cruze Essence 5x105 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.