FRENES

Fiat Doblo Maxi PCD

2010–2022
VERIFIED
⌀58.1
PCD5x98
Centre bore58.1 mm
Offset (ET)ET36
Fixing typeM14x1.50
Tightening torque86 Nm
Original tyres195/60R16
Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Doblo Maxi

A Fiat Doblo Maxi (2010–2022) uses a 5x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x98 required. See all vehicles with 5x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET36. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 86 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Doblo Maxi without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat e-Doblo from 2022 Fiat 500L Trekking from 2013 Fiat 500L from 2012 Fiat Doblo 2001–2005 Fiat Scudo 1996–2004 Fiat Ulysse 1994–2002 Fiat Tipo 1988–1995 Alfa Romeo 4C 2013–2020 RAM Promaster City from 2013 Holden Combo from 2011 Alfa Romeo GT 2003–2010 Lancia Phedra 2002–2010 Peugeot 807 from 2002 Alfa Romeo 147 2001–2010 Alfa Romeo 156 1997–2006 Citroen Jumpy 1996–2006

Will wheels from another vehicle fit your Doblo Maxi?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Citroen C8 ⌀65.1 Alfa Romeo 75 5 trou, V6 ⌀58.6

Frequently asked questions

What is the PCD of a Fiat Doblo Maxi?

A Fiat Doblo Maxi (2010–2022) has a PCD of 5x98: 5 studs or bolts spaced around a circle 98 mm in diameter.

Does a Fiat Doblo Maxi need a hub centric ring?

The centre bore (hub diameter) of a Fiat Doblo Maxi is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Doblo Maxi?

The recorded original offset is ET36. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Fiat Doblo Maxi?

The specified tightening torque is 86 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Fiat Doblo Maxi?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Fiat e-Doblo, Fiat 500L Trekking, Fiat 500L, Fiat Doblo. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.