A Dacia Logan III (from 2020) uses a 4x100 PCD and a centre bore of 60.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Dacia Logan
Previous generation: Dacia Logan II (2012–2020) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Dacia Logan III without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.
A Dacia Logan III (from 2020) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.
Does a Dacia Logan III need a hub centric ring?
The centre bore (hub diameter) of a Dacia Logan III is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Dacia Logan III?
The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Dacia Logan III?
The specified tightening torque is 105 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Dacia Logan III?
With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Dacia Jogger, Dacia Spring, Dacia Sandero III, Dacia Dokker. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more