Ferrari 599 GTB Fiorano PCD

from 2006

VERIFIED

Centre bore66.9 mm

Offset (ET)ET63

Fixing type-

Tightening torque110 Nm

Hub centric rings 66.9 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ferrari 599 GTB Fiorano

A Ferrari 599 GTB Fiorano (from 2006) uses a 5x114.3 PCD and a centre bore of 66.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 66.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.9 mm.
Offset: the original is ET63. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your 599 GTB Fiorano?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.9 mm, and will not fit if it is smaller.

Ferrari Purosangue ⌀67.1 Ferrari 296 GTB ⌀67.1 Ferrari Portofino M ⌀67.1 Ferrari Roma ⌀67.1 Ferrari F8 Spider axe arrière ⌀67.1 Ferrari F8 Spider axe avant ⌀67.1 Ferrari F8 Tributo axe arrière ⌀67.1 Ferrari F8 Tributo axe avant ⌀67.1

Frequently asked questions

What is the PCD of a Ferrari 599 GTB Fiorano?

A Ferrari 599 GTB Fiorano (from 2006) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Ferrari 599 GTB Fiorano need a hub centric ring?

The centre bore (hub diameter) of a Ferrari 599 GTB Fiorano is 66.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ferrari 599 GTB Fiorano?

The recorded original offset is ET63. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ferrari 599 GTB Fiorano?

The specified tightening torque is 110 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Ferrari models

Purosangue 5x114.3 296 GTB 5x114.3 Roma 5x114.3 Portofino M 5x114.3 F8 Spider axe arrière 5x114.3 F8 Tributo axe avant 5x114.3 F8 Spider axe avant 5x114.3 F8 Tributo axe arrière 5x114.3 Portofino 5x114.3 812 Superfast 5x114.3 488 Spider 5x114.3 GTC4 Lusso 5x114.3 All Ferrari →

Does a value look wrong, or is a version missing? Let us know, we check every report.