FRENES

Ferrari Portofino M PCD

from 2020
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Fixing typeM14x1.50
Original tyres245/35R20
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ferrari Portofino M

A Ferrari Portofino M (from 2020) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 245/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ferrari Portofino M without rings. Offset, width, diameter and caliper clearance still need checking.

Ferrari Purosangue from 2023 Ferrari 296 GTB from 2022 Ferrari Roma from 2020 Ferrari F8 Spider axe arrière 2019–2023 Ferrari F8 Spider axe avant 2019–2023 Ferrari F8 Tributo axe arrière 2019–2023 Ferrari F8 Tributo axe avant 2019–2023 Ferrari 812 Superfast from 2017 Ferrari Portofino 2017–2021 Ferrari 488 Spider from 2016 Ferrari GTC4 Lusso from 2016 Ferrari 488 GTB from 2015 Ferrari F12 tdf from 2015 Ferrari 458 Spider from 2011 Ferrari FF 2011–2017 Ferrari 458 Italia from 2010

Will wheels from another vehicle fit your Portofino M?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ferrari Portofino M?

A Ferrari Portofino M (from 2020) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Ferrari Portofino M need a hub centric ring?

The centre bore (hub diameter) of a Ferrari Portofino M is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

Which vehicles have the same PCD as a Ferrari Portofino M?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Ferrari Purosangue, Ferrari 296 GTB, Ferrari Roma, Ferrari F8 Spider axe arrière. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.