FRENES

Ferrari SF90 Stradale PCD

from 2019
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET35.9 to ET43.3
Fixing typeM14x1.5
Original tyres255/35R20, 315/30R20
Stradale et Spider.
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ferrari SF90 Stradale

A Ferrari SF90 Stradale (from 2019) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET35.9 to ET43.3. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/35R20, 315/30R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x114.3 67.1 mm 9.5Jx20 ET43.3 255/35R20
Arrière 5x114.3 67.1 mm 11.5Jx20 ET35.9 315/30R20

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ferrari SF90 Stradale without rings. Offset, width, diameter and caliper clearance still need checking.

Ferrari Purosangue from 2023 Ferrari 296 GTB from 2022 Ferrari Daytona SP3 from 2022 Ferrari Portofino M from 2020 Ferrari Roma from 2020 Ferrari F8 Spider axe arrière 2019–2023 Ferrari F8 Spider axe avant 2019–2023 Ferrari F8 Tributo axe arrière 2019–2023 Ferrari F8 Tributo axe avant 2019–2023 Ferrari 488 Pista 2018–2020 Ferrari 812 Superfast from 2017 Ferrari Portofino 2017–2021 Ferrari 488 Spider from 2016 Ferrari GTC4 Lusso from 2016 Ferrari 488 GTB from 2015 Ferrari F12 tdf from 2015

Will wheels from another vehicle fit your SF90 Stradale?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ferrari SF90 Stradale?

A Ferrari SF90 Stradale (from 2019) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Ferrari SF90 Stradale need a hub centric ring?

The centre bore (hub diameter) of a Ferrari SF90 Stradale is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ferrari SF90 Stradale?

The recorded original offset is ET35.9 to ET43.3 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Ferrari SF90 Stradale?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Ferrari Purosangue, Ferrari 296 GTB, Ferrari Daytona SP3, Ferrari Portofino M. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.