Ford Excursion PCD

2000–2005

VERIFIED

Centre bore124.9 mm

Offset (ET)ET10

Fixing typeM14x2.00

Tightening torque220 Nm

Original tyres245/75R17

Hub centric rings 124.9 mm → Wheel spacers 8x170(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Excursion

A Ford Excursion (2000–2005) uses a 8x170 PCD and a centre bore of 124.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 8x170 required. See all vehicles with 8x170.
Centre bore: the wheel must have a centre bore of 124.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 124.9 mm.
Offset: the original is ET10. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x2.00, tightened to 220 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/75R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 8x170 PCD and same 124.9 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Excursion without rings. Offset, width, diameter and caliper clearance still need checking.

Ford F250 1999–2007 Ford F150 1997–2004 Ford F350 1997–2004

Will wheels from another vehicle fit your Excursion?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Ford Excursion?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford F250 1999–2007 Wheels from Ford F150 1997–2004 Wheels from Ford F350 1997–2004

Frequently asked questions

What is the PCD of a Ford Excursion?

A Ford Excursion (2000–2005) has a PCD of 8x170: 8 studs or bolts spaced around a circle 170 mm in diameter.

Does a Ford Excursion need a hub centric ring?

The centre bore (hub diameter) of a Ford Excursion is 124.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Excursion?

The recorded original offset is ET10. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Excursion?

The specified tightening torque is 220 Nm for M14x2.00 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Excursion?

With the same PCD (8x170) and the same centre bore (124.9 mm), these include: Ford F250, Ford F150, Ford F350. Offset, width and rim diameter still need checking for each vehicle.

Other Ford models

Capri 5x112 Explorer EV 5x112 Transit Courier 5x108 Tourneo Courier 5x108 E-Transit 5x160 Mustang Mach-E 5x108 Puma (J2K) 5x108 Kuga III 5x108 Focus IV 5x108 Fiesta MK8 4x108 Tourneo 5x160 EcoSport 4x108 All Ford →

Does a value look wrong, or is a version missing? Let us know, we check every report.