Ford F250 PCD

1999–2007

VERIFIED

Centre bore124.9 mm

Offset (ET)ET10 to ET40

Fixing typeEcrous - 14x2.00

Tightening torque220 Nm

Original tyres245/75R17

Hub centric rings 124.9 mm → Wheel spacers 8x170(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford F250

A Ford F250 (1999–2007) uses a 8x170 PCD and a centre bore of 124.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 8x170 required. See all vehicles with 8x170.
Centre bore: the wheel must have a centre bore of 124.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 124.9 mm.
Offset: the original is ET10 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x2.00, tightened to 220 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/75R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	8x170	124.9 mm	—	ET10	245/75R17
Version 2	8x170	124.9 mm	—	ET40	245/75R17

Vehicles with the same PCD and centre bore

Same 8x170 PCD and same 124.9 mm centre bore: wheels from these vehicles bolt on and centre on a Ford F250 without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Excursion 2000–2005 Ford F150 1997–2004 Ford F350 1997–2004

Will wheels from another vehicle fit your F250?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Ford F250?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford Excursion 2000–2005 Wheels from Ford F150 1997–2004 Wheels from Ford F350 1997–2004

Frequently asked questions

What is the PCD of a Ford F250?

A Ford F250 (1999–2007) has a PCD of 8x170: 8 studs or bolts spaced around a circle 170 mm in diameter.

Does a Ford F250 need a hub centric ring?

The centre bore (hub diameter) of a Ford F250 is 124.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford F250?

The recorded original offset is ET10 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford F250?

The specified tightening torque is 220 Nm for Ecrous - 14x2.00 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford F250?

With the same PCD (8x170) and the same centre bore (124.9 mm), these include: Ford Excursion, Ford F150, Ford F350. Offset, width and rim diameter still need checking for each vehicle.

Other Ford models

Capri 5x112 Explorer EV 5x112 Transit Courier 5x108 Tourneo Courier 5x108 E-Transit 5x160 Mustang Mach-E 5x108 Kuga III 5x108 Puma (J2K) 5x108 Focus IV 5x108 Fiesta MK8 4x108 Tourneo 5x160 EcoSport 4x108 All Ford →

Does a value look wrong, or is a version missing? Let us know, we check every report.