FRENES

Ford GT axe arrière PCD

2005–2006
VERIFIED
⌀70.5
PCD5x114.3
Centre bore70.5 mm
Offset (ET)ET30 to ET40
Fixing typeEcrous - 1/2 - 20 UN
Tightening torque135 Nm
Original tyres315/40R19, 325/30R20
Hub centric rings 70.5 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford GT axe arrière

A Ford GT axe arrière (2005–2006) uses a 5x114.3 PCD and a centre bore of 70.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 70.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.5 mm.
  • Offset: the original is ET30 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 1/2 - 20 UN, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 315/40R19, 325/30R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 70.5 mm 11.5Jx19 ET40 315/40R19
Version 2 5x114.3 70.5 mm — ET30 325/30R20

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 70.5 mm centre bore: wheels from these vehicles bolt on and centre on a Ford GT axe arrière without rings. Offset, width, diameter and caliper clearance still need checking.

Ford GT axe avant 2005–2006 Ford Crown Victoria 1992–1997

Will wheels from another vehicle fit your GT axe arrière?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford GT axe arrière?

A Ford GT axe arrière (2005–2006) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Ford GT axe arrière need a hub centric ring?

The centre bore (hub diameter) of a Ford GT axe arrière is 70.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford GT axe arrière?

The recorded original offset is ET30 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford GT axe arrière?

The specified tightening torque is 135 Nm for Ecrous - 1/2 - 20 UN fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford GT axe arrière?

With the same PCD (5x114.3) and the same centre bore (70.5 mm), these include: Ford GT axe avant, Ford Crown Victoria. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.