Holden Commodore VF PCD

from 2013

VERIFIED

Centre bore66.9 mm

Offset (ET)ET45

Fixing type-

Hub centric rings 66.9 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Holden Commodore VF

A Holden Commodore VF (from 2013) uses a 5x120 PCD and a centre bore of 66.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 66.9 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.9 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 66.9 mm centre bore: wheels from these vehicles bolt on and centre on a Holden Commodore VF without rings. Offset, width, diameter and caliper clearance still need checking.

Holden Commodore VE from 2006 Buick Envision from 2020 Cadillac CT5 from 2020 Cadillac CT5-V from 2020 Cadillac CT6-V from 2020 Chevrolet Corvette C8 from 2020 Cadillac XT4 from 2018 Cadillac CT6 from 2016 GMC Terrain 2010–2018

Will wheels from another vehicle fit your Commodore VF?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.9 mm, and will not fit if it is smaller.

Lexus TX ⌀60.1 Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1 VinFast VF9 ⌀74.1 BYD Han ⌀64.1 BYD Seal ⌀64.1 Land Rover Range Rover V ⌀72.6

Frequently asked questions

What is the PCD of a Holden Commodore VF?

A Holden Commodore VF (from 2013) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Holden Commodore VF need a hub centric ring?

The centre bore (hub diameter) of a Holden Commodore VF is 66.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Holden Commodore VF?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Holden Commodore VF?

With the same PCD (5x120) and the same centre bore (66.9 mm), these include: Holden Commodore VE, Buick Envision, Cadillac CT5, Cadillac CT5-V. Offset, width and rim diameter still need checking for each vehicle.

Other Holden models

Cruze Wagon Diesel 5x115 Cruze Wagon Essence 5x105 Volt 5x115 Barina 4 trou 4x100 Barina 5 trou 5x105 Combo 5x98 Barina Spark 4x100 Colorado 6x139.7 Cruze Diesel 5x115 Cruze Essence 5x105 Captiva 5x115 Commodore VE 5x120 All Holden →

Does a value look wrong, or is a version missing? Let us know, we check every report.