Holden Cruze Diesel PCD

from 2009

VERIFIED

Centre bore70.3 mm

Offset (ET)ET41

Fixing typeEcrous - 12x1.50

Original tyres205/60R16

Hub centric rings 70.3 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Holden Cruze Diesel

A Holden Cruze Diesel (from 2009) uses a 5x115 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x115 required. See all vehicles with 5x115.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Holden Cruze Diesel without rings. Offset, width, diameter and caliper clearance still need checking.

Holden Cruze Wagon Diesel from 2012 Holden Volt from 2012 Holden Captiva from 2006 Cadillac ATS 2013–2019 Opel Cascada 2013–2019 Chevrolet Volt from 2012 Opel Ampera from 2012 Chevrolet Orlando 2011–2014 Opel Zafira Tourer 2011–2018 GMC Terrain 2010–2018 Chevrolet Cruze Diesel from 2009 Opel Astra J 1.6T, 1.7D, 2.0D 2009–2015 Saturn Vue 2007–2010 Buick Lucerne 2006–2011 Chevrolet Captiva from 2006 Opel Antara 2006–2014

Will wheels from another vehicle fit your Cruze Diesel?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Holden Cruze Diesel?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Holden Cruze Wagon Diesel from 2012 Wheels from Holden Volt from 2012 Wheels from Holden Captiva from 2006 Wheels from Chevrolet Volt from 2012

Same PCD, different centre bore

These vehicles also use 5x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Dodge Challenger ⌀71.6 Opel Insignia ⌀70.2 Dodge Charger ⌀71.6 Chrysler 300C ⌀71.6 Chrysler 300C 4x4 ⌀71.6 Dodge Magnum ⌀71.6 Dodge Magnum 4x4 ⌀71.6 Lancia Thema ⌀71.5

Frequently asked questions

What is the PCD of a Holden Cruze Diesel?

A Holden Cruze Diesel (from 2009) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.

Does a Holden Cruze Diesel need a hub centric ring?

The centre bore (hub diameter) of a Holden Cruze Diesel is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Holden Cruze Diesel?

The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Holden Cruze Diesel?

With the same PCD (5x115) and the same centre bore (70.3 mm), these include: Holden Cruze Wagon Diesel, Holden Volt, Holden Captiva, Cadillac ATS. Offset, width and rim diameter still need checking for each vehicle.

Other Holden models

Commodore VF 5x120 Cruze Wagon Diesel 5x115 Cruze Wagon Essence 5x105 Volt 5x115 Barina 4 trou 4x100 Barina 5 trou 5x105 Combo 5x98 Barina Spark 4x100 Colorado 6x139.7 Cruze Essence 5x105 Captiva 5x115 Commodore VE 5x120 All Holden →

Does a value look wrong, or is a version missing? Let us know, we check every report.