Honda NSX axe arrière PCD

from 2016

VERIFIED

Centre bore70.1 mm

Offset (ET)ET55

Fixing typeEcrous - 14x1.50

Tightening torque160 Nm

Original tyres305/30R20

Hub centric rings 70.1 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda NSX axe arrière

A Honda NSX axe arrière (from 2016) uses a 5x120 PCD and a centre bore of 70.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 70.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.1 mm.
Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 305/30R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 70.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda NSX axe arrière without rings. Offset, width, diameter and caliper clearance still need checking.

Honda NSX axe avant from 2016 Acura NSX axe arrière from 2016 Acura NSX axe avant from 2016 Land Rover Discovery II 1998–2005 Land Rover Range Rover II 1995–2002

Will wheels from another vehicle fit your NSX axe arrière?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Honda NSX axe arrière?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Acura NSX axe arrière from 2016

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.1 mm, and will not fit if it is smaller.

Honda Odyssey ⌀72.5 Honda Ridgeline ⌀64.1 Honda Pilot ⌀64.1 Honda Legend ⌀64.1 Lexus TX ⌀60.1 Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1

Frequently asked questions

What is the PCD of a Honda NSX axe arrière?

A Honda NSX axe arrière (from 2016) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Honda NSX axe arrière need a hub centric ring?

The centre bore (hub diameter) of a Honda NSX axe arrière is 70.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda NSX axe arrière?

The recorded original offset is ET55. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda NSX axe arrière?

The specified tightening torque is 160 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda NSX axe arrière?

With the same PCD (5x120) and the same centre bore (70.1 mm), these include: Honda NSX axe avant, Acura NSX axe arrière, Acura NSX axe avant, Land Rover Discovery II. Offset, width and rim diameter still need checking for each vehicle.

Other Honda models

e:Ny1 5x114.3 ZR-V 5x114.3 e:Np1 5x114.3 e:Ns1 5x114.3 e 5x114.3 WR-V 4x100 NSX axe avant 5x120 XR-V 5x114.3 CR-Z 5x114.3 Insight 4x100 Fit 4x100 Civic Hybrid 5x114.3 All Honda →

Does a value look wrong, or is a version missing? Let us know, we check every report.