Honda Ridgeline PCD

from 2005

VERIFIED

Centre bore64.1 mm

Offset (ET)ET45

Fixing typeEcrous - 14x1.50

Hub centric rings 64.1 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Ridgeline

A Honda Ridgeline (from 2005) uses a 5x120 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Ridgeline without rings. Offset, width, diameter and caliper clearance still need checking.

Honda Pilot 2003–2008 Honda Legend 1985–1990 BYD Han from 2022 BYD Seal from 2022 BYD Tang from 2021 Acura RLX from 2018 Nio ES8 from 2018 Acura MDX from 2017 Tesla Model X from 2016 BYD Etp3 from 2014 BYD M3 from 2014 BYD T3 from 2014 Tesla Model S from 2012

Will wheels from another vehicle fit your Ridgeline?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Honda NSX axe arrière ⌀70.1 Honda NSX axe avant ⌀70.1 Honda Odyssey ⌀72.5 Lexus TX ⌀60.1 Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1 VinFast VF9 ⌀74.1

Frequently asked questions

What is the PCD of a Honda Ridgeline?

A Honda Ridgeline (from 2005) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Honda Ridgeline need a hub centric ring?

The centre bore (hub diameter) of a Honda Ridgeline is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Ridgeline?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Honda Ridgeline?

With the same PCD (5x120) and the same centre bore (64.1 mm), these include: Honda Pilot, Honda Legend, BYD Han, BYD Seal. Offset, width and rim diameter still need checking for each vehicle.

Other Honda models

e:Ny1 5x114.3 ZR-V 5x114.3 e:Np1 5x114.3 e:Ns1 5x114.3 e 5x114.3 WR-V 4x100 NSX axe arrière 5x120 NSX axe avant 5x120 XR-V 5x114.3 CR-Z 5x114.3 Insight 4x100 Fit 4x100 All Honda →

Does a value look wrong, or is a version missing? Let us know, we check every report.