FRENES

Infiniti FX 30,35,37,45,50 PCD

2003–2008
VERIFIED
⌀66.1
PCD5x114.3
Centre bore66.1 mm
Offset (ET)ET35 to ET45
Fixing typeEcrous - 12x1.25
Original tyres265/60R18
Hub centric rings 66.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Infiniti FX 30,35,37,45,50

A Infiniti FX 30,35,37,45,50 (2003–2008) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET35 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 66.1 mm — ET35 —
Version 2 5x114.3 66.1 mm — ET45 265/60R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Infiniti FX 30,35,37,45,50 without rings. Offset, width, diameter and caliper clearance still need checking.

Infiniti QX55 from 2021 Infiniti QX60 from 2021 Infiniti QX50 from 2018 Infiniti Q50 from 2013 Infiniti Q60 2013–2023 Infiniti JX35 2012–2013 Infiniti EX 25,35,37,30d 2007–2014 Infiniti G25 2007–2015 Infiniti G37 Coupe 2007–2015 Infiniti G35 2003–2007 Infiniti M 35,45 2003–2010 Infiniti Q45 2003–2008 Infiniti M 25,37,56,35h,30d 2002–2014 Dacia Bigster from 2025 Renault 4 E-Tech from 2025 Renault 5 E-Tech from 2024

Will wheels from another vehicle fit your FX 30,35,37,45,50?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Infiniti FX 30,35,37,45,50?

A Infiniti FX 30,35,37,45,50 (2003–2008) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Infiniti FX 30,35,37,45,50 need a hub centric ring?

The centre bore (hub diameter) of a Infiniti FX 30,35,37,45,50 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Infiniti FX 30,35,37,45,50?

The recorded original offset is ET35 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Infiniti FX 30,35,37,45,50?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Infiniti QX55, Infiniti QX60, Infiniti QX50, Infiniti Q50. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.