Isuzu Gemini PCD

1990–1993

VERIFIED

Centre bore60.1 mm

Offset (ET)ET40

Fixing typeEcrous - 12x1.50

Hub centric rings 60.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Isuzu Gemini

A Isuzu Gemini (1990–1993) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Isuzu Gemini without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Twingo E-Tech from 2026 Dacia Jogger from 2022 Dacia Spring from 2021 Dacia Sandero III from 2020 Renault Clio 5 from 2019 Nissan Micra K14 from 2017 Nissan Almera from 2015 Renault Twingo 3 2014–2024 Smart Forfour Back 2014–2021 Smart Forfour Front 2014–2021 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023 Renault Zoe 2013–2024 Dacia Dokker from 2012 Dacia Lodgy from 2012 Dacia Sandero II 2012–2020

Will wheels from another vehicle fit your Gemini?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.

Isuzu Piazza ⌀56.6 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Hyundai i20 III ⌀54.1 Leapmotor T03 ⌀50 Hyundai i10 III ⌀54.1

Frequently asked questions

What is the PCD of a Isuzu Gemini?

A Isuzu Gemini (1990–1993) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Isuzu Gemini need a hub centric ring?

The centre bore (hub diameter) of a Isuzu Gemini is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Isuzu Gemini?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Isuzu Gemini?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Renault Twingo E-Tech, Dacia Jogger, Dacia Spring, Dacia Sandero III. Offset, width and rim diameter still need checking for each vehicle.

Other Isuzu models

D-Max 6x139.7 Oasis 5x114.3 Campo 2WD 6x139.7 Campo 4WD 6x139.7 Piazza 4x100 Trooper 6x139.7 All Isuzu →

Does a value look wrong, or is a version missing? Let us know, we check every report.