FRENES

Wheels from Honda Accord on Rover 800-Serie: compatible?

Yes, the hub is identical

Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from Honda Accord bolt on and centre on Rover 800-Serie without rings. You still need to check the offset and tyres, detailed below.

Honda Accord1982–1990Rover 800-Serie1986–1991
PCD4x100 / 4x114.3 / 5x114.34x114.3
Centre bore64.1 mm64.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels R
≈6Jx14 ET50
≈6Jx15 ET55
≈6.5Jx16 ET45
≈7Jx17 ET45		 R
≈6Jx15 ET50

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Honda Accord is compared with the one from Rover 800-Serie of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET55 · 195/65R15 — Check on the car

    Compared with the original ≈6Jx15 ET50 on Rover 800-Serie: shock absorber side +5 mm, wheel arch side −5 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx14 ET50 · 185/70R14

    Rover 800-Serie has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈6.5Jx16 ET45 · 205/60R16

    Rover 800-Serie has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈7Jx17 ET45 · 225/50R17

    Rover 800-Serie has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Rover 800-Serie (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Rover 800-Serie on Honda Accord?