Yes, the hub is identical
Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from Rover 800-Serie bolt on and centre on Honda Accord without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Rover 800-Serie is compared with the one from Honda Accord of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈6Jx15 ET50 · 195/65R15 — Fits like the original
Compared with the original ≈6Jx15 ET55 on Honda Accord: shock absorber side −5 mm, wheel arch side +5 mm, tyre diameter +0 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Honda Accord (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Honda Accord on Rover 800-Serie?