Rover 800-Serie PCD

1986–1991

VERIFIED

Centre bore64.1 mm

Offset (ET)ET50

Fixing typeEcrous - 12x1.50

Tightening torque110 Nm

Original tyres195/65R15

Hub centric rings 64.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Rover 800-Serie

A Rover 800-Serie (1986–1991) uses a 4x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	64.1 mm	—	ET50	195/65R15
Version 2	4x114.3	64.1 mm	—	ET50	—

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Rover 800-Serie without rings. Offset, width, diameter and caliper clearance still need checking.

Rover 600-Serie 1993–1999 Honda Prelude 4 trou 1992–2000 Acura Legend 1985–1990 Honda Legend 1985–1990 Honda Accord 1982–1990

Will wheels from another vehicle fit your 800-Serie?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Rover 800-Serie?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Honda Prelude 4 trou 1992–2000 Wheels from Honda Accord 1982–1990

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6

Frequently asked questions

What is the PCD of a Rover 800-Serie?

A Rover 800-Serie (1986–1991) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Rover 800-Serie need a hub centric ring?

The centre bore (hub diameter) of a Rover 800-Serie is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Rover 800-Serie?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Rover 800-Serie?

The specified tightening torque is 110 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Rover 800-Serie?

With the same PCD (4x114.3) and the same centre bore (64.1 mm), these include: Rover 600-Serie, Honda Prelude 4 trou, Acura Legend, Honda Legend. Offset, width and rim diameter still need checking for each vehicle.

Other Rover models

CityRover 4x100 Streetwise 4x100 25 4x100 45 4x100 75 5x100 MGF Roadster 4x95.25 600-Serie 4x114.3 100-Serie 4x95.25 200-Serie 4x100 400-Serie 4x100 All Rover →

Does a value look wrong, or is a version missing? Let us know, we check every report.