FRENES

Honda Accord PCD

1982–1990
VERIFIED
⌀64.1
PCD5x114.3 or 4x100 or 4x114.3
Centre bore56.1 or 64.1 mm
Offset (ET)ET45 to ET55
Fixing typeEcrous - 12x1.50
Tightening torque108 Nm
Original tyres185/70R14, 195/65R15, 205/60R16, 225/50R17
⚠ This model comes with 5x114.3 or 4x100 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 64.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Accord

A Honda Accord (1982–1990) uses a 5x114.3 or 4x100 or 4x114.3 PCD and a centre bore of 56.1 or 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 4x100 or 4x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
  • Offset: the original is ET45 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/70R14, 195/65R15, 205/60R16, 225/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm — ET45 —
Version 2 4x114.3 64.1 mm — ET50 185/70R14
Version 3 5x114.3 64.1 mm — ET55 195/65R15
Version 4 5x114.3 64.1 mm — ET45 205/60R16
Version 5 5x114.3 64.1 mm — ET45 225/50R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Accord without rings. Offset, width, diameter and caliper clearance still need checking.

Honda e:Ny1 from 2023 Honda e:Np1 from 2022 Honda e:Ns1 from 2022 Honda ZR-V from 2022 Honda e from 2020 Honda XR-V from 2014 Honda CR-Z 2010–2017 Honda Civic Hybrid 2006–2011 Honda Element from 2005 Honda FR-V 2005–2010 Honda Elysion 2004–2015 Honda Pilot 2003–2008 Honda Civic Type R 2001–2006 Honda HR-V 1999–2005 Honda Accord Coupe 1998–2001 Honda Integra Type R 1998–2001

Will wheels from another vehicle fit your Accord?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda Accord?

A Honda Accord (1982–1990) can have a 5x114.3 or 4x100 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Honda Accord need a hub centric ring?

The centre bore (hub diameter) of a Honda Accord is 56.1 or 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Accord?

The recorded original offset is ET45 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Accord?

The specified tightening torque is 108 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Accord?

With the same PCD (5x114.3) and the same centre bore (64.1 mm), these include: Honda e:Ny1, Honda e:Np1, Honda e:Ns1, Honda ZR-V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.