FRENES

Wheels from Mitsubishi Colt on Honda Life Dunk: compatible?

Yes, with hub centric rings

Same 4x100 PCD, but the centre bore of the wheels from Mitsubishi Colt (67.1 mm) is larger than the hub of Honda Life Dunk (56.1 mm): you need 4 hub centric rings 67.1 → 56.1.

Rings 67.1 → 56.1

Mitsubishi Colt1988–1992Honda Life Dunk2000–2003
PCD4x114.3 / 4x1004x100
Centre bore67.1 mm56.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈5.5Jx13 ET46
≈5.5Jx14 ET46
≈6Jx14 ET46
≈6Jx15 ET46
≈6Jx16 ET37		 ≈5Jx13 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mitsubishi Colt is compared with the one from Honda Life Dunk of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈5.5Jx13 ET46 · 175/70R13 — Check on the car

    Compared with the original ≈5Jx13 ET40 on Honda Life Dunk: shock absorber side +12.4 mm, wheel arch side 0 mm, tyre diameter +8.2 % : fit it with the original tyre size of Honda Life Dunk (155/65R13), not that of Mitsubishi Colt. Comparison for guidance only (estimated width). Check in detail

  • ≈5.5Jx14 ET46 · 175/65R14

    Honda Life Dunk has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈6Jx14 ET46 · 185/60R14

    Honda Life Dunk has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈6Jx15 ET46 · 195/50R15

    Honda Life Dunk has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈6Jx16 ET37 · 195/55R16

    Honda Life Dunk has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Honda Life Dunk (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Honda Life Dunk on Mitsubishi Colt?