FRENES

Wheels from Omoda 5 on Renault Megane 2 RS: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 60.1 mm centre bore: wheels from Omoda 5 bolt on and centre on Renault Megane 2 RS without rings. You still need to check the offset and tyres, detailed below.

Omoda 5from 2024Renault Megane 2 RS2004–2009
PCD5x1085x108
Centre bore60.1 mm60.1 mm
ThreadM12x1.5M14x1.5
Original wheels 6.5Jx17 ET33
7Jx18 ET33		 7Jx17 ET68
7.5Jx17 ET68
7.5Jx18 ET68
8Jx18 ET68
8Jx18 ET68

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Omoda 5 is compared with the one from Renault Megane 2 RS of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx17 ET33 · 215/60R17 — Risk of rubbing

    Compared with the original 7Jx17 ET68 on Renault Megane 2 RS: shock absorber side −41.4 mm, wheel arch side +28.7 mm, tyre diameter +8.7 % : fit it with the original tyre size of Renault Megane 2 RS (225/45R17), not that of Omoda 5. Check in detail

  • 7Jx18 ET33 · 215/55R18 — Risk of rubbing

    Compared with the original 7.5Jx18 ET68 on Renault Megane 2 RS: shock absorber side −41.4 mm, wheel arch side +28.7 mm, tyre diameter +8.9 % : fit it with the original tyre size of Renault Megane 2 RS (225/40R18), not that of Omoda 5. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Megane 2 RS (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Megane 2 RS on Omoda 5?