FRENES

Wheels from Renault Megane 2 RS on Omoda 5: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 60.1 mm centre bore: wheels from Renault Megane 2 RS bolt on and centre on Omoda 5 without rings. You still need to check the offset and tyres, detailed below.

Renault Megane 2 RS2004–2009Omoda 5from 2024
PCD5x1085x108
Centre bore60.1 mm60.1 mm
ThreadM14x1.5M12x1.5
Original wheels 7Jx17 ET68
7.5Jx17 ET68
7.5Jx18 ET68
8Jx18 ET68
8Jx18 ET68		 6.5Jx17 ET33
7Jx18 ET33

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Megane 2 RS is compared with the one from Omoda 5 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx17 ET68 · 225/45R17 — Risk of rubbing

    Compared with the original 6.5Jx17 ET33 on Omoda 5: shock absorber side +41.4 mm, wheel arch side −28.7 mm, tyre diameter −8 % : fit it with the original tyre size of Omoda 5 (215/60R17), not that of Renault Megane 2 RS. Check in detail

  • 7.5Jx17 ET68 · 225/45R17 — Risk of rubbing

    Compared with the original 6.5Jx17 ET33 on Omoda 5: shock absorber side +47.7 mm, wheel arch side −22.3 mm, tyre diameter −8 % : fit it with the original tyre size of Omoda 5 (215/60R17), not that of Renault Megane 2 RS. Check in detail

  • 7.5Jx18 ET68 · 225/40R18 — Risk of rubbing

    Compared with the original 7Jx18 ET33 on Omoda 5: shock absorber side +41.4 mm, wheel arch side −28.7 mm, tyre diameter −8.1 % : fit it with the original tyre size of Omoda 5 (215/55R18), not that of Renault Megane 2 RS. Check in detail

  • 8Jx18 ET68 · 225/40R18 — Risk of rubbing

    Compared with the original 7Jx18 ET33 on Omoda 5: shock absorber side +47.7 mm, wheel arch side −22.3 mm, tyre diameter −8.1 % : fit it with the original tyre size of Omoda 5 (215/55R18), not that of Renault Megane 2 RS. Check in detail

  • 8Jx18 ET68 · 235/40R18 — Risk of rubbing

    Compared with the original 7Jx18 ET33 on Omoda 5: shock absorber side +47.7 mm, wheel arch side −22.3 mm, tyre diameter −7 % : fit it with the original tyre size of Omoda 5 (215/55R18), not that of Renault Megane 2 RS. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Omoda 5 (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Omoda 5 on Renault Megane 2 RS?