FRENES

Wheels from Opel Vivaro on Renault Captur II: compatible?

Yes, with hub centric rings

Same 5x114.3 PCD, but the centre bore of the wheels from Opel Vivaro (71.1 mm) is larger than the hub of Renault Captur II (66.1 mm): you need 4 hub centric rings 71.1 → 66.1.

Rings 71.1 → 66.1

Opel Vivaro2001–2014Renault Captur IIfrom 2019
PCD5x118 / 5x114.35x114.3
Centre bore71.1 mm66.1 mm
ThreadM14x1.50M12x1.5
Original wheels R
≈6.5Jx16 ET50		 6.5Jx16 ET32
7Jx17 ET35
7Jx18 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Opel Vivaro is compared with the one from Renault Captur II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET50 · 205/65R16 — Check on the car

    Compared with the original 6.5Jx16 ET32 on Renault Captur II: shock absorber side +18 mm, wheel arch side −18 mm, tyre diameter −1.9 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Captur II (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Captur II on Opel Vivaro?