Opel Vivaro PCD

2001–2014
VERIFIED
⌀71.1
Centre bore71.1 or 66.1 mm
Offset (ET)ET50
Fixing typeM14x1.50
Tightening torque142 Nm
Original tyres205/65R16
⚠ This model comes with 5x118 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Opel Vivaro

A Opel Vivaro (2001–2014) uses a 5x118 or 5x114.3 PCD and a centre bore of 71.1 or 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x118 or 5x114.3 required. See all vehicles with 5x118.
  • Centre bore: the wheel must have a centre bore of 71.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 142 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x118 71.1 mm — ET50 —
Version 2 5x114.3 66.1 mm — ET50 205/65R16

Vehicles with the same PCD and centre bore

Same 5x118 PCD and same 71.1 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Vivaro without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Vivaro?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Vivaro?

A Opel Vivaro (2001–2014) can have a 5x118 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Opel Vivaro need a hub centric ring?

The centre bore (hub diameter) of a Opel Vivaro is 71.1 or 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Vivaro?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Vivaro?

The specified tightening torque is 142 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Vivaro?

With the same PCD (5x118) and the same centre bore (71.1 mm), these include: Laika Kosmo V5, Laika Kosmo V9, Roller Team Zefiro Fiat Ducato, Roller Team Kronos Fiat Ducato. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.