FRENES

Kia Niro II PCD

from 2022
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET46 to ET52
Fixing typeM12x1.5
Original tyres205/60R16, 215/55R17, 225/45R18
Écrous ; hybride et électrique
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Niro II

A Kia Niro II (from 2022) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46 to ET52. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 215/55R17, 225/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Kia Niro

Previous generation: Kia Niro (2016–2022) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Niro 2016–2022 · 5x114.3 Niro II from 2022

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 6.5Jx16 ET46 205/60R16
Version 2 5x114.3 67.1 mm 7Jx17 ET52 215/55R17
Version 3 5x114.3 67.1 mm 7.5Jx18 ET52 225/45R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Niro II without rings. Offset, width, diameter and caliper clearance still need checking.

Kia EV3 from 2024 Kia EV9 from 2023 Kia EV6 from 2021 Kia Sportage V from 2021 Kia Sorento IV from 2020 Kia e-Soul 2019–2024 Kia Niro EV from 2019 Kia ProCeed from 2019 Kia XCeed from 2019 Kia Ceed III from 2018 Kia Stinger 2017–2024 Kia Niro 2016–2022 Kia Sportage IV 2016–2021 Kia Ceed GT from 2013 Kia Rondo 2013–2018 Kia Ceed II 2012–2018

Will wheels from another vehicle fit your Niro II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Kia Niro II?

A Kia Niro II (from 2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Kia Niro II need a hub centric ring?

The centre bore (hub diameter) of a Kia Niro II is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Niro II?

The recorded original offset is ET46 to ET52 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Kia Niro II?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Kia EV3, Kia EV9, Kia EV6, Kia Sportage V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.