FRENES

Kia Sorento IV PCD

from 2020
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET47 to ET54
Fixing typeM12x1.5
Original tyres235/65R17, 235/60R18, 235/55R19, 255/45R20
MQ4, restylage 2023
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Sorento IV

A Kia Sorento IV (from 2020) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET47 to ET54. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17, 235/60R18, 235/55R19, 255/45R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Kia Sorento

Previous generation: Kia Sorento (2002–2009) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Sorento 2002–2009 · 5x114.3 Sorento IV from 2020

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 7Jx17 ET47 235/65R17
Version 2 5x114.3 67.1 mm 7.5Jx18 ET49.5 235/60R18
Version 3 5x114.3 67.1 mm 7.5Jx19 ET49.5 235/55R19
Version 4 5x114.3 67.1 mm 8.5Jx20 ET54 255/45R20

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Sorento IV without rings. Offset, width, diameter and caliper clearance still need checking.

Kia EV3 from 2024 Kia EV9 from 2023 Kia Niro II from 2022 Kia EV6 from 2021 Kia Sportage V from 2021 Kia e-Soul 2019–2024 Kia Niro EV from 2019 Kia ProCeed from 2019 Kia XCeed from 2019 Kia Ceed III from 2018 Kia Stinger 2017–2024 Kia Niro 2016–2022 Kia Sportage IV 2016–2021 Kia Ceed GT from 2013 Kia Rondo 2013–2018 Kia Ceed II 2012–2018

Will wheels from another vehicle fit your Sorento IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Kia Sorento IV?

A Kia Sorento IV (from 2020) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Kia Sorento IV need a hub centric ring?

The centre bore (hub diameter) of a Kia Sorento IV is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Sorento IV?

The recorded original offset is ET47 to ET54 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Kia Sorento IV?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Kia EV3, Kia EV9, Kia Niro II, Kia EV6. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.