Lexus SC430 PCD

2001–2010

VERIFIED

Centre bore60.1 mm

Offset (ET)ET50

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Hub centric rings 60.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lexus SC430

A Lexus SC430 (2001–2010) uses a 5x114.3 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Lexus SC430 without rings. Offset, width, diameter and caliper clearance still need checking.

Lexus LBX from 2023 Lexus RZ from 2023 Lexus ES from 2018 Lexus UX from 2018 Lexus RX 2015–2022 Lexus RX200t 2015–2022 Lexus NX 2014–2020 Lexus RC from 2014 Lexus GS300h 2012–2020 Lexus RX270 2009–2015 Lexus RX450h 2009–2015 Lexus IS F from 2008 Lexus RX350 2006–2009 Lexus GS450h 2005–2012 Lexus RX330 2003–2009 Lexus RX400h 2003–2009

Will wheels from another vehicle fit your SC430?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.

Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1 Renault 5 E-Tech ⌀66.1

Frequently asked questions

What is the PCD of a Lexus SC430?

A Lexus SC430 (2001–2010) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Lexus SC430 need a hub centric ring?

The centre bore (hub diameter) of a Lexus SC430 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lexus SC430?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Lexus SC430?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Lexus SC430?

With the same PCD (5x114.3) and the same centre bore (60.1 mm), these include: Lexus LBX, Lexus RZ, Lexus ES, Lexus UX. Offset, width and rim diameter still need checking for each vehicle.

Other Lexus models

TX 5x120 RZ 5x114.3 LBX 5x114.3 ES 5x114.3 UX 5x114.3 LC 5x120 LS 5x120 RX 5x114.3 RX200t 5x114.3 RC 5x114.3 NX 5x114.3 GS300h 5x114.3 All Lexus →

Does a value look wrong, or is a version missing? Let us know, we check every report.