Lotus Emira front PCD

from 2022

VERIFIED

Centre bore69.1 mm

Offset (ET)ET57

Fixing typeM12x1.50

Tightening torque105 Nm

Original tyres245/35R20

Hub centric rings 69.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lotus Emira front

A Lotus Emira front (from 2022) uses a 5x114.3 PCD and a centre bore of 69.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 69.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 69.1 mm.
Offset: the original is ET57. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your Emira front?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 69.1 mm, and will not fit if it is smaller.

Lotus Emira back ⌀68.1 Lotus Exige S3 back ⌀68.1 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1

Frequently asked questions

What is the PCD of a Lotus Emira front?

A Lotus Emira front (from 2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Lotus Emira front need a hub centric ring?

The centre bore (hub diameter) of a Lotus Emira front is 69.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lotus Emira front?

The recorded original offset is ET57. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Lotus Emira front?

The specified tightening torque is 105 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Lotus models

Eletre 5x120 Emira back 5x114.3 Exige S3 back 5x114.3 Exige S3 front 5x110 Exige S2 4x100 Elise S2 Front 4x100 Elise S2 Rear 4x100 Exige S1 4x95.25 Elise S1 4x95.25 Elan M100 4x100 All Lotus →

Does a value look wrong, or is a version missing? Let us know, we check every report.