Mazda RX-7 PCD

1979–1983

VERIFIED

Centre bore59.6 or 67.1 mm

Offset (ET)ET20 to ET45

Fixing typeEcrous - 12x1.50

Original tyres185/70R13

⚠ This model comes with 5x114.3 or 4x110 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 59.6 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda RX-7

A Mazda RX-7 (1979–1983) uses a 5x114.3 or 4x110 or 4x114.3 PCD and a centre bore of 59.6 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 or 4x110 or 4x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 59.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.6 mm.
Offset: the original is ET20 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x110	59.6 mm	—	ET20	185/70R13
Version 2	4x114.3	59.6 mm	—	ET45	—
Version 3	5x114.3	59.6 mm	—	ET40	—
Version 4	5x114.3	67.1 mm	—	ET45	—

Will wheels from another vehicle fit your RX-7?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mazda RX-7?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mazda 626 1979–1982 Wheels from Mitsubishi Lancer 1988–1992

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.6 mm, and will not fit if it is smaller.

Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1 Mazda CX-60 ⌀67.1 Mazda MX-30 ⌀67.1 Mazda CX-30 ⌀67.1 Mazda CX-3 ⌀67.1 Mazda Mazda3 ⌀67.1 Mazda CX-5 ⌀67.1

Frequently asked questions

What is the PCD of a Mazda RX-7?

A Mazda RX-7 (1979–1983) can have a 5x114.3 or 4x110 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Mazda RX-7 need a hub centric ring?

The centre bore (hub diameter) of a Mazda RX-7 is 59.6 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda RX-7?

The recorded original offset is ET20 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.