A Mazda Mazda2 (from 2015) uses a 4x100 PCD and a centre bore of 54.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda Mazda2 without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 54.1 mm, and will not fit if it is smaller.
A Mazda Mazda2 (from 2015) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.
Does a Mazda Mazda2 need a hub centric ring?
The centre bore (hub diameter) of a Mazda Mazda2 is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Mazda Mazda2?
The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Mazda Mazda2?
The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Mazda Mazda2?
With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Mazda 2, Mazda Demio, Mazda MX-3, Mazda MX-5. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more