FRENES

Mazda Mazda3 BP PCD

from 2019
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET45
Fixing typeM12x1.5
Original tyres205/60R16, 215/45R18
Écrous
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda Mazda3 BP

A Mazda Mazda3 BP (from 2019) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 215/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 6.5Jx16 ET45 205/60R16
Version 2 5x114.3 67.1 mm 7Jx18 ET45 215/45R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda Mazda3 BP without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Mazda CX-60 from 2022 Mazda MX-30 from 2020 Mazda CX-30 from 2019 Mazda CX-5 II from 2017 Mazda CX-3 2015–2024 Mazda Mazda3 2013–2019 Mazda CX-5 2012–2017 Mazda Mazda6 GJ 2012–2024 Mazda Mazda3 MPS 2009–2013 Mazda CX-7 2007–2012 Mazda CX-9 from 2007 Mazda 3 MPS 2006–2009 Mazda 6 MPS 2006–2008 Mazda 5 2005–2010

Will wheels from another vehicle fit your Mazda3 BP?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mazda Mazda3 BP?

A Mazda Mazda3 BP (from 2019) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mazda Mazda3 BP need a hub centric ring?

The centre bore (hub diameter) of a Mazda Mazda3 BP is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda Mazda3 BP?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mazda Mazda3 BP?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Mazda CX-80, Mazda Mazda6e, Mazda CX-60, Mazda MX-30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.