MG MG F PCD

1995–2002

VERIFIED

Centre bore56.6 mm

Offset (ET)ET28

Fixing typeM12x1.50

Original tyres185/55R15

Hub centric rings 56.6 mm → Wheel spacers 4x95.25(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a MG MG F

A MG MG F (1995–2002) uses a 4x95.25 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x95.25 required. See all vehicles with 4x95.25.
Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
Offset: the original is ET28. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/55R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x95.25 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a MG MG F without rings. Offset, width, diameter and caliper clearance still need checking.

Lotus Exige S1 2000–2004 Lotus Elise S1 1996–2001 Rover MGF Roadster 1996–2006 Caterham 7 Classic 1992–1998

Will wheels from another vehicle fit your MG F?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x95.25 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.6 mm, and will not fit if it is smaller.

Rover 100-Serie ⌀57.1 Triumph TR8 ⌀57.1 Triumph TR7 ⌀57.1

Frequently asked questions

What is the PCD of a MG MG F?

A MG MG F (1995–2002) has a PCD of 4x95.25: 4 studs or bolts spaced around a circle 95.25 mm in diameter.

Does a MG MG F need a hub centric ring?

The centre bore (hub diameter) of a MG MG F is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a MG MG F?

The recorded original offset is ET28. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a MG MG F?

With the same PCD (4x95.25) and the same centre bore (56.6 mm), these include: Lotus Exige S1, Lotus Elise S1, Rover MGF Roadster, Caterham 7 Classic. Offset, width and rim diameter still need checking for each vehicle.

Other MG models

MG4 5x112 Astor 5x100 Marvel R 5x120 eHS 5x112 RX6 5x112 MG5 5x112 ZS EV 5x112 RX5 5x112 MG3 4x100 TF 4x95.3 ZT 5x100 ZR 4x100 All MG →

Does a value look wrong, or is a version missing? Let us know, we check every report.