A Mini Cooper F55 5 portes (2014–2024) uses a 5x112 PCD and a centre bore of 66.6 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
Offset: the original is ET45 to ET54. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/65R15, 175/60R16, 195/55R16, 185/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Mini Cooper
Previous generation: Mini Cooper R57 Cabriolet (2009–2015) — the bolt pattern changes (5x112 instead of 4x100): the wheels are not interchangeable. Next generation: Mini Cooper F57 Cabriolet (2016–2024) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x112
66.6 mm
5.5Jx15
ET46
175/65R15
Version 2
5x112
66.6 mm
5.5Jx16
ET46
175/60R16
Version 3
5x112
66.6 mm
6.5Jx16
ET54
195/55R16
Version 4
5x112
66.6 mm
6.5Jx16
ET46
195/55R16
Version 5
5x112
66.6 mm
5.5Jx17
ET45
185/50R17
Version 6
5x112
66.6 mm
7Jx17
ET54
205/45R17
Vehicles with the same PCD and centre bore
Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mini Cooper F55 5 portes without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x112 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.6 mm, and will not fit if it is smaller.
A Mini Cooper F55 5 portes (2014–2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.
Does a Mini Cooper F55 5 portes need a hub centric ring?
The centre bore (hub diameter) of a Mini Cooper F55 5 portes is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Mini Cooper F55 5 portes?
The recorded original offset is ET45 to ET54 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Mini Cooper F55 5 portes?
The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Mini Cooper F55 5 portes?
With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Mini Aceman J05, Mini Cooper F66, Mini Countryman U25, Mini Countryman F60. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more